Why the BONBO Straw Cup 200ml Works for First Sips
The BONBO straw cup 200ml is designed for babies and kids, with a size and shape that suit small hands and early drinking practice. Its simple, durable build makes it a practical choice for daily meals and snacks, and the design blends easily into home interiors.
Before first use, check that the silicone rings are attached correctly—this is essential for a secure seal. The cup holds 200 ml, so it's a good size for small servings of water, milk, or diluted juice. Just remember not to pour in boiling water, as it can cause scalds and warpage.
BONBO 200ml at a Glance
- BONBO straw cup 200ml: Set: W76 x D74 x H123 mm / 200 ml | Approx. 90g Compact dimensions make it easy to store and handle.

BONBO straw cup 200ml - BONBO straw cup 200ml: Cup: φ72 x H80 mm / 240 ml | Approx. 70g The cup itself holds 240 ml to the brim, but the set is rated for 200 ml to leave room for the lid and straw.
- BONBO straw cup 200ml: Lid: W76 x D74 x H10 mm | Approx. 20g A lightweight lid that seals the cup for travel or storage.
- BONBO straw cup 200ml: Straw: φ8 x H120 x W13 mm | Approx. 4g The straw length is sized for the cup, so kids can sip comfortably.
- BONBO straw cup 200ml: Materials: Copolyester, Polypropylene, Silicone | BPA Free | Made in China Durable, BPA-free materials that are safe for kids and adults.
How to Set Up the Cup for the First Sip
Follow these steps to prepare the BONBO straw cup for its first use.
- Check the silicone rings: Ensure the silicone rings are attached correctly to the lid and straw. This helps prevent leaks.
- Fill with a suitable beverage: Pour in water, milk, or diluted juice—but avoid boiling water. Leave a little space below the rim to prevent overflow when closing.
- Close the lid slowly: Close the lid gently to avoid drinks spurting out from the straw.
- Test the seal: Give the cup a gentle shake over a sink to check for leaks before handing it to your child.
Everyday Use and Leak-Free Tips
The BONBO straw cup is designed for daily table use with babies and kids. To keep drinks from leaking, always check that the lid is fully closed and the silicone rings are in place. Avoid overfilling—the 200 ml capacity leaves room for the lid and straw, but filling to the very top can cause overflow when you close the lid.
The cup is made of durable materials that can be used by kids and adults alike. However, it is not suitable for microwave use, and you should keep it away from open flames. Also, be aware that citrus fruit juices may cause the product to deteriorate over time due to terpene in the fruit's skin, so it's best to reserve the cup for water, milk, and non-citrus drinks.
How to Clean the BONBO Straw Cup
Regular cleaning keeps the cup hygienic and extends its life. Follow these steps after each use.
- Disassemble: Remove the lid and straw from the cup. Separate the silicone rings if possible, but be careful not to lose them.
- Wash immediately: Rinse all parts with warm water and mild dish soap. Use a bottle brush to clean the straw and the corners of the lid. Do not use abrasive cleansers or steel wool, as they can scratch the surface.
- Dishwasher option: The BONBO cup is dishwasher safe. Place all parts in the upper basket to avoid force and weight that may cause distortions.
- Dry thoroughly: After washing, dry all parts well with a clean cloth or allow them to air dry completely. Keep the cup dry when not in use.
- Disinfect if needed: A disinfectant solution for baby feeding products with sodium hypochlorite as the main ingredient can be used. Follow the product's instructions for dilution and soaking time.
What to Avoid
To keep the BONBO straw cup in good condition, avoid using it in the microwave or placing it near open flames. Do not pour boiling water into the cup, as it may cause scalds and warpage. Also, avoid abrasive cleansers or steel wool, which can scratch the surface. When using a dishwasher, always place the parts in the upper basket to prevent distortion.
Note that some products may have roughness on the surface due to the polishing process to remove sharp parts, and some may have thin lines from the plastic manufacturing process. These are normal and do not affect the safety or function of the cup.


