Back to Blog
Tips & Care 2026-11-15 Kinto 0 views

WATER BOTTLE Silicone Ring Set of 2: Fit and Replacement FAQ

WATER BOTTLE Silicone Ring Set of 2: Fit and Replacement FAQ

Straight answers on the WATER BOTTLE silicone ring set of 2: what each ring measures, how to tell it needs replacing, and what to check before you buy a spare.

What the silicone ring set actually contains

How many rings come in the set?
Two. The product is sold as a set of 2 silicone rings in white-no-color, so you get a working ring plus a spare in one purchase.
What size is each ring?
Each ring is listed at φ38 x H8 mm. That is the size to compare against the ring you are replacing before you order.
What are the rings made of?
Silicone, made in China. Silicone is the flexible, water-resistant material that lets the ring sit snugly where it seals.
How much does a ring weigh?
Approximately 2 g each. That is light enough that a spare ring takes up almost no space in a drawer or travel kit.

A note on the 300/500ml label

The product name includes 300/500ml, which points to the bottle sizes the set is intended for. The supplied record does not list a separate ring dimension for each bottle size, so treat φ38 x H8 mm as the reference measurement and check your own bottle's ring against it.

If your bottle is a different capacity or model, do not assume the fit. Measure the old ring first, or contact Kinto with your bottle model before ordering.

Signs the old ring is the reason your bottle leaks

The bottle leaks when tipped, but the lid is tight
A worn or misplaced ring is a common cause of a leaking water bottle. Check that the ring sits flat and fully seated before assuming the lid is at fault.
The ring looks stretched, torn, or flattened
Silicone can lose its shape over time. If the ring no longer sits evenly in its groove, replacement is the practical fix.
The ring has changed color or feels tacky
This can happen with repeated use. A fresh ring from the set restores a clean sealing surface.
You have already tried cleaning and reseating it
If cleaning and reseating did not stop the leak, swap in one of the spare rings before buying a new bottle.

How to replace the ring without damaging it

The supplied record does not include manufacturer disassembly steps, so use these as general handling guidance and check your bottle's own instructions if you have them.

  1. Remove the old ring gently: Ease the ring out of its groove with your fingers rather than a sharp tool, which can nick the silicone or scratch the lid.
  2. Clean and dry the groove: Wipe out any residue so the new ring can seat flat. A dry groove helps the ring stay in place during reassembly.
  3. Seat the new ring evenly: Press the φ38 x H8 mm ring into the groove all the way around, checking that no section is twisted or pinched.
  4. Test with water before carrying: Fill the bottle, close the lid, and tip it over a sink. If it still leaks, reseat the ring and check the lid alignment.

Care and storage questions

How should I clean the silicone rings?
The supplied record does not include specific cleaning instructions. As general care, rinse the ring after use and let it dry fully before storing it. Avoid harsh abrasives that could roughen the silicone surface.
Can I store the spare ring in the bottle?
It is better to keep the spare ring dry and separate. At approximately 2 g, it stores easily in a small bag or drawer without taking up space.
How often should I replace the ring?
There is no set interval in the supplied information. Replace it when you see stretching, tearing, flattening, or a leak that reseating does not fix.
Does the white-no-color option match my bottle?
The set is listed in white-no-color only. If your bottle's ring is a different color, the replacement will be white-no-color.

WATER BOTTLE silicone ring set of 2 at a glance

Related Articles

Customer Service
Home
Products
Cart
Profile