DAY OFF TUMBLER 900ml

SPECIFICATIONS

W 89 x H272 mm / 900 ml / approx. 500 g
*Height of body (without lid and spout) H208 mm

DETAILS

Name: Stainless steel portable thermos / Capacity: 0.9L / Material: Stainless steel (powder coating), polypropylene, silicone rubber / BPA free / Made in China / Heat retention: 70℃ or higher (6 hours) Cold retention: 6℃ or lower (6 hours) *Heat retention refers to the temperature of hot water measured 6 hours after putting hot water into the product at room temperature of 20℃±2℃ and the water temperature reaches 95℃±1℃, the lid is closed, and the temperature of the water is measured 6 hours later. *Cold retention refers to the temperature of cold water measured 6 hours after putting cold water into the product at room temperature of 20℃±2℃ and the water temperature reaches 4℃±1℃, the lid is closed, and the temperature of the water is measured 6 hours later. *Before putting in the beverage, add a small amount of hot water (cold water) Put in and preheat (precool) for about 1-2 minutes to improve the heat retention (cold retention) effect. This product is a beverage bottle. Cannot be used in microwaves, ovens, dishwashers, or dryers. Do not place near fire. Do not boil. Keep out of reach of infants. Do not drop or subject to strong impact as this may cause damage or water leakage. Do not put dry ice or carbonated drinks in the bottle as it may expand and cause damage or injury. Be careful not to put too much beverage in as it may overflow when closing the drinking spout part. If the lid and drinking spout part are not closed properly, the liquid inside may leak, so make sure it is closed properly. Please use with the silicone gasket properly. When closing the lid, make sure it is closed horizontally. Turn the lid counterclockwise, and then turn it clockwise from the point where you feel a click and it will close horizontally. After closing the lid, turn the product upside down or sideways to make sure there are no leaks. If you put it in a bag, etc., place it vertically to prevent any leakage. When opening the lid, make sure to hold the drinking spout part firmly in place while turning the lid so that it does not come loose. Due to its double structure, the drink inside may be hot even if the part you touch with your hand is not hot, so be careful not to get burned. Do not leave it in a car or other places where it may get hot. Do not leave it for a long time with contents inside, as this may cause rust or the drink to spoil. To prevent rust on stainless steel, remove dirt and moisture as soon as possible, dry thoroughly, and store away from other metals. Do not leave it in water as this may cause rust or damage. Do not use cleansers or scrubbing pads to clean. Do not use chlorine bleach, as this may cause rust. If rust-like spots appear inside the container, add lukewarm water and about 10% citric acid, wait 2-3 hours, wash with a soft sponge, and rinse thoroughly.

Instruction Manual

https://cdn.shopify.com/s/files/1/0093/4785/8510/files/KINTO_DOT900ml.pdf?v=1737018124